Download REMOVAL 1. REMOVE REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler ) a. Put protective tape around the rear bumper assembly. b. Using a screwdriver, open the 2 rear bumper plates. HINT: Tape the screwdriver tip before use. c. Remove the 6 screws and 2 clips. d. Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration. HINT: Use the same procedures for the RH side and LH side. e. Remove the rear bumper assembly. 2. REMOVE REAR FLOOR BOARD (w/ Rear Lower Spoiler ) a. Remove the 4 screws, 2 clips, 3 nuts and rear floor board. 3. REMOVE REAR BUMPER ASSEMBLY (w/Rear Lower Spoiler) a. Put protective tape around the rear bumper assembly. b. Using a screwdriver, open the 2 rear bumper plates. HINT: Tape the screwdriver tip before use. c. Remove the 6 screws. d. Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration. HINT: Use the same procedures for the RH side and LH side. e. Remove the rear bumper assembly. INSTALLATION 1. INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler ) a. Engage each claw. b. Install the rear bumper assembly with the 6 screws and 2 clips. c. Install the 2 rear bumper plates. 2. INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler ) a. Engage each claw. b. Install the rear bumper assembly with the 6 screws. c. Install the 2 rear bumper plates. 3. INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler ) a. Install the rear floor board with the 3 nuts, 2 clips and 4 screws.
The post 2007 Toyota Camry Rear Bumper Removal and Replacement appeared first on ToManual.com.
